Warning, Low-rider, Mounting hardware – Land of Nod Low Rider Bookcase User Manual

Page 4: Tools required wall mounting assembly

Advertising
background image

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is
essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs
whenever possible.
A) Attach

mounting bracket to top of unit using 2 small screws.

B) Determine the final location of unit. Mark position on the wall, approximately 2" below the mounting bracket mounted to
the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than
the anchor. Gently tap the

plastic anchor until the flange of the anchor is flush with the wall.

D) Attach the

mounting bracket to the wall by inserting 2 large screws through the mounting bracket and into the wall

anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the

wall strap through both brackets, and into the other end of the strap.

G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional.
Wall mounting assembly is now complete.

LOW-RIDER

BOOKCASE

Made in Vietnam - r06

Page 4 of 4

Customer Service

800.933.9904 | Latest instructions available at www.landofnod.com

A

C

D

small

screw

mounting

bracket

plastic

anchor

large

screw

wall

strap

mounting

bracket

Serious or fatal crushing injuries can occur from furniture
tip over. Use of tip-over restraints may only reduce, but
not eliminate, the risk of tip-over. To help prevent tip-over,
install tip restraint per instructions below.

WARNING

!

4 - small
screws

4 - large
screws

4 - plastic
anchors

4 - mounting
brackets

Missing hardware? Please call

800.933.9904

for replacements. NOTE: Contains small
parts. Keep away from small children.

MOUNTING HARDWARE

2 - wall straps

TOOLS REQUIRED

WALL MOUNTING ASSEMBLY

power drill

(for pilot holes only)

phillips head screwdriver

WALL

Advertising