Land of Nod VERONA CRIB User Manual
Page 9
The mattress height should be lowered as your baby grows to ensure that
he/she does not climb out of the CRIB. When child is able to pull to a
standing position, set mattress to lowest position and remove bumber pads,
large toys, and other objects that could serve as steps for climbing out.
Regularly asses your baby’s abilities and make adjustments accordingly.
To adjust the height of the mattress support, remove the mattress from the
crib. Unscrew all four MATTRESS SUPPORT BOLTS , remove all LOCKING
WASHERS , and REGULAR WASHERS and remove MATTRESS
SUPPORT PANEL . Remove and reinsert the smooth ends of each
MATTRESS SUPPORT PIN in mattress support holes on END RAILS
at desired height. Refer to steps 7 through 9 for reinserting MATTRESS
SUPPORT PANELS and reattaching REGULAR WASHERS , LOCKING
WASHERS , and MATTRESS SUPPORT BOLTS .
Periodically check to make sure every component is properly and securely
in place and all bolts and fasteners are tight.
Do not scratch or chip the finish. Do not use abrasive chemicals for
cleaning. Clean with mild oap on a soft rag. Rinse and dry throughoughly.
If you ever refinish this furniture, be sure to use only a non-toxic finish
specified for childrens furniture.
Store crib in a dry area.
operation