Vitek VT-3545 W - Manual (Page 8)

ENGLISH
9
When insert adapter and turn on the “Continue - Projection” button, projection
light will turn on continuously until the button is switched off or the AC adapter is
pulled off.
Temperature function
Press °C/°F to select the temperature display between Celsius or
Fahrenheit.
Specifications
Indoor Temperature measurement
Proposed operating range:
0°C to + 50.0°C (32.0°F to 122.0°F)
Temperature resolution: 0.1°C (0.2°F)
Temperature sensing cycle: approx. 1 minute
Power: use 2 ps UM-3 “AA” 1.5 V batteries
Weight: 155 g
Dimension: 134 x 73 x 50 mm
Precautions
This product is engineered to give you years of satisfactory service if you handle it
carefully. Here a few precautions:
1. Do not immerse the unit in water
2. Do not clean the unit with abrasive or corrosive materials. They may scratch the
plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust, temperature or humidity,
which may result in malfunction, shorter electronic life span, damaged battery and
distorted parts.
4. Do not tamper with the unit’s internal components. Doing so will invalidate the
warranty on the unit and may cause unnecessary damage. The unit contains no
user-serviceable parts.
5. Only use fresh batteries as specified in the user’s manual. Do not mix new and old
batteries as the old ones may leak.
6. Always read the user’s manual thoroughly before operating the unit.
Specifications subject to change without prior notice.
MINIMUM SERVICE LIFE - 3 YEARS
Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom
the appliance was purchased. The bill of sale or receipt must be produced when
making any claim under the terms of this guarantee.
This product conforms to the EMC-Requirements as laid down by the
Council Directive 89/336/EEC and to the Law Voltage Regulation (73/23 EEC)
3545IM.indd 9 26.05.2006 12:09:27