Land of Nod LOW-RISE CRIB - Manual (Page 6)

Low Rise Crib
Assembly Instructions
Made in USA - r05 Page 6 of 6
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as
necessary. For future use, keep these instructions in the plastic bag attached to the mat-
tress support spring.
MAINTENANCE
Upon completion of assembly be sure all screws, bolts and fastening devices have been
tightened securely. Periodically repeat this check to make sure all screws, bolts and fasten-
ing devices are tight. Before each usage or assembly, inspect crib for damaged hardware,
loose joints, missing parts or sharp edges. DO NOT use crib if parts are missing or broken.
DO NOT substitute parts. DO NOT make any alteration to this crib.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to crib surface
using a soft clean cloth lightly dampened in the solution. Rinse with clean water again
using a soft clean cloth, then dry all surfaces thoroughly with a soft dry cloth. NO ABRA-
SIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS SHOULD BE USED TO
CLEAN THIS FINE FURNITURE.
STORAGE
A plastic pouch is attached to the crib for the storage of the assembly directions for future
referral. After completing the assembly process you are advised to read and beware of all
WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE notices contained
in these instructions. We caution you not to place excess hardware in the plastic pouch as
it could present danger to a child if retrieved and it could also puncture the crib mattress.
For long term storage of the crib, store in a cool, dry place and keep away from moisture
and extreme temperature changes.