Longacre 45215 Brake Line - Manual

Basic Brake Line Installation Tips:
1. Pre-Install kit before painting frame
2. Attach frame tabs after locating hard lines to eliminate or reduce field made double flares
3. Attach Adel® clamps after hard lines are installed
4. Check all connections for leaks. Field Flares MUST be double flare type
CROSS MEMBER
F
R
A
M
E
FRAME
REAR CLIP
Frame Tab
Bulk Head Fitting
T-Fitting
LF Caliper
20" Hard Line
(#1)
18" Flex line
8" Hard Line (#2)
40" Hard Line (#3)
Frame Tab
Bulk Head
Fitting
RF Caliper
18" Flex line
Front Master
Cylinder
Rear Master
Cylinder
Coupling
20" Hard Line (#4)
40" Hard Line (#5)
Coupling
T-Fitting
40" Hard Line (#6)
8" Hard Line (#7)
40" Hard Line (#8)
Frame Tab
Bulk Head Fitting
LR Caliper
24" Flex line
Frame Tab
Bulk Head Fitting
RR Caliper
24" Flex line
Adel Clamp Typ.
12 Locations
To Master
Cylinder Pressure
Spare 20" Hard Line
Spare 8" Hard Line.
Add between Hard Line
#4 & Hard Line #5 for
cars over 105" WB
RF
LF
LR
RR
Brake Line Kit Installation
Longacre Racing Products, Inc
360 453 2030 www.longacreracing.com
Longacre Racing Products -Brake Line Kit – Part Numbers 45215 & 45216