Lynn Electronics MC-SFP-10km - Manual (Page 3)

www.lynnelec.com
MC-SFP-10km
1310 nm Single-mode Transceiver, 10.5dB margin
Small Form Pluggable (SFP), 3.3 V
1.0625Gbd Fiber Channel/1.25 Gigabit Ethernet
TEC Opitx Solutions
Division of Lynn Electronics Corp.
154 Railroad Drive • Ivyland, PA. 18974
Receiver Electro-optical Characteristics
Vcc = 3.1 V to 3.5 V, T
A
= 0
°C to 70 °C
PARAMETER SYMBOL MIN TYP. MAX UNITS NOTE
Optical Input Power-maximum P
IN

3 --- --- dBm BER < 10
12
Optical Input Power-minimum
(Sensitivity)
P
IN
--- ---
20 dBm BER < 10
12
Operating Center Wavelength 
C
1260 --- 1610 nm
Optical Return Loss ORL 12 --- --- dB
Receiver Electrical 3dB Upper
Cutoff Frequency
--- --- --- 1500 MHz
Signal Detect-Asserted P
A
--- ---
20 dBm
Signal Detect-Deasserted P
D

31 --- --- dBm
Stressed Receiver Sensitivity --- ---
14.4 dBm Note 1, 2
Differential Output Voltage V
DIFF
0.37 --- 2.0 V
Data Output Rise, Fall Time
(20

80%)
T
r, f
--- --- 0.35 ns
Receiver Loss of Signal Output
Voltage-Low
RX_LOS
L
0 --- 0.5 V
Receiver Loss of Signal Output
Voltage-High
RX_LOS
H
2.4 --- V
CC
V
Receiver Loss of Signal Assert
Time (off to on)
t
A,RX_LOS
--- --- 100 μs
Receiver Loss of Signal Assert
Time (on to off)
t
D,RX_LOS
--- --- 100 μs
Note 1: Measured with conformance test signal at TP3 for BER = 10
12
at the eye center.
Note 2: Measured with a transmit signal having a 9 dB extinction ratio. If another extinction ratio is used, the Stressed receiver
sensitivity should be corrected for the extinction ratio penalty.