M&C TechGroup SP2000-H320_S2 Operator's manual - Manual (Page 30)

30
Gas sampling and gas conditioning technology 2-1.1.4-ME
Figure 15 Positioning of the thermostat and heating cartridge

Remove the lid of the electrical connection box after having loosened the 4 screws.
 Unscrew both screws “A“ on the bottom of the connection box (figure 16) which are serving to
mount the connection box on to the holding clip.
 Unscrew the hexagon head cap screws “B“ (figure 16) which are serving to fix the heating car-
tridge receiving plate and the thermostat sensor receiving plate.
Figure 16 Positioning of the fixing screws and cable gland

Remove the connection box including heating cartridge and thermostat sensor (figure 17)

Loosen the leading- in cable gland “C“ for the heating cartridge and the capillaries of the ther-
mostat.
Heating cartridge
Thermostat
Hexagon head screws “B“
Cable gland “C“
Hexagon head screws “A“