M&C TechGroup MP26-H1 Operator's manual - Manual (Page 14)

14
Gas sampling and gas conditioning technology 6-1.1.15-ME
15 MAINTENANCE
Before the maintenance work is carried out, it is necessary that the specific safety procedures
pertaining to the system and operational process be observed!
W A R N I N G !
It is necessary to take the pump off the mains before any assembly,
maintenance or repair work is carried out! Wait until the tempera-
ture is low enough to do maintenance.
Diaphragm and valve plates are the only parts of the pump subject to wear. They are simple to
change.
W A R N I N G !
Aggressive medium is possible.
Wear protective glasses and proper protective clothing during dis-
assambly, repair or cleaning!
Figure 4 Sectional drawing MP26-H1
Valve, induction side
Valve, pressure side