M&C TechGroup GL Data sheet User Manual
Threaded couplings for gl connections, Special features, Application
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[email protected] • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
11.5
Embracing Challenge
Corrosion resistant
Gas tight
Easy to handle
Special Features
Threaded Couplings for GL
Connections
Connecting Adapters, Union Sealing Ring and Adjustable
Couplings
GL18-DN4/6/PV
Application
M&C “GL’’ glass connectors which are nor-
mally fitted with sealing rings may only be
used to join or connect rigid tubes, such as
Polyethylene or Polypropylene etc.
For flexible tubes, such as PVC, FPM and also
PTFE, a connecting adapter must be used.
When high operating pressures (>1 bar g) are
encountered, connecting adapters for rigid
tubes must be used.
When ordering connecting adapters on a
new device, it is not necessary to place a
separate order for sealing rings and compres-
sion nuts, unless the sizes required are differ-
ent from standard.
Technical specifications and illustrations are without
obligation, subject to modifications. 09.96/06.06