Manhattan 460835 Long Range CCD Barcode Scanner - Programming Menu - Manual (Page 60)

58
6.7 Sensitivity of Continuous Read ing Mode
A> Quick Setting:
<Fast>
Slow
B> Same Code Delay Reading Interval
Following code sequences represent the
length of time before a barcode can be
rescanned at continuous and flash reading
mode. The value can be defined from 1-50
and they represent 100ms to 5 seconds in
100ms interval.Default value is 3 (0.3 seconds).
To setup same code delay reading interval:
1.Scan the "Begin" label
2.Go the Decimal Value Tables in Appendix A,
Scan label(s),that represents the same code
delay reading interval.They are ranged form
1-50.One step is represented 0.1second.So
the interval is from 0.1 to 5 seconds.
3.Scan the "Complete" label
Repeat the steps 1-3 to set time out of same
symbol
1.Begin 2.Decimal Value
(1-50) (Appendix A)
3.Complete
6.8 Notebook Function
Enable
<Disable>
%0 3 8 8
%0 3 8 0
%0 3 4 4
%0 3 4 0
%3 0 0 0 0
%3 0 0 0 1