Manhattan 525480 150N Wireless Router - Manual - Manual (Page 54)

54
ADVANCED FUNCTIONS
Enable DMZ — Check to enable this function; uncheck to disable.
Public IP — Select “Dynamic IP” or “Static IP.” If you select “Dynamic IP,” you need
to select an Internet connection session from the drop-down menu; if you select
“Static IP,” enter the IP address that you want to map to a specific private IP
address.
Client PC IP Address — Enter the private IP address that the Internet IP address
will be mapped to. That is the computer you want to bypass the firewall and NAT.
Computer Name — With all the computers connected to the router listed in this
drop-down menu, you can select a name without checking its IP address.
Add — Click to add the public IP address and associated private IP address to the
DMZ table.
Reset — Click to remove all entries (in either panel).
Current DMZ Table — All existing public/private IP address mappings.
Delete — Select one or more DMZ entries to delete by checking the “Select” box of
those you want to delete, then clicking “Delete.”
Delete All — Click to delete all DMZ entries.