Manhattan 401517 Contact CCD Barcode Scanner - Programming Manual - Manual (Page 41)

38
5.9 Code 93 Parameters
A> Check Digit Transmission
<Calculate Check 2 Digits
& Not Transmit>
Do Not Calculate
Check Digit
B> Set Up Code Length
To set the fixed length:
1. Scan the "Begin" label of the desired set.
2. Go to the Decimal Value Tables in Appendix A,
scan label(s) that represents the length to be
read.
3. Scan the "Complete" label of the desired set.
Repeat the steps 1 - 3 to set additional lengths.
%0 KN3
%0 KN4