Naxa NMV-154 - Manual (Page 6)

Page 5
1 Connecting to PC and Charger
1.1 System Configuration Requirements
OS: Windows XP/2K/ME/98 (driver installation needed) /Linux9 and above
/Mac OS 10 / Windows 7
CPU: Pentium-133MHz at least
Memory: 32MB at least
Hard disk free space, 100MB at least
Video card: above 640*480, enhanced color at least (16 bits)
1.2 Connecting to PC
Connect the player to PC with the USB cable in power-off/on mode; the system
enters U-disk mode directly and charges automatically.
Disconnect the USB connection or delete the hardware on the PC, the system
enters player’s operation mode.
If select not to disconnect USB connection, the system keeps in charging mode
on its operation interface.
1.3 Connecting to Charger (Adapter)
Connect the MP4 player with the charger; the system will display 2 options:
U-disk and USB charging. It will return to the main interface for any selection.
The system pops out charging prompt and starts charging.
Note: the charging LED (left LED) is on when charging.