Naxa NPD-1003 - Manual (Page 12)

Preference Page
Ɣ TV Type: Set the color system to NTSC/ PAL
or AUTO. (The color system in US/ Canada
and Mexico is NTSC).
Ɣ Audio: Select and set the priority of the
available languages.
Ɣ Subtitle: Select and set the priority of the
available subtitle languages .
Ɣ Disc Menu:
Select and set the priority of the available
languages of the disc menu.
Ɣ Default: To resume all the setting to factory
default settings.
Tv Type Ntsc
Audio Eng
Subtitle Eng
Disc Menu Eng
Default
- - e g a P e c n e r e f e r P - -
Go To Preference Page
Settings Menu
Ordinary problem &troubleshooting
1 .Can not play discs
(1). Check whether the disk is placed correctly or
clamped well
(2). Place the disc with the printed side facing upward.
 ,IWKHUHLVGLUWRQWKHGLVFVSOHDVHFOHDQLW¿UVW
(4). Check disc whether have deformation or
rupture or serious scratch.
5). Disc format is whether supported type by the
player.
2. Remote control does not work
(1). Move the block away between the remote
control and the player
(2). Aim the remote control at the IR window of the
DVD player.
(3). Check whether the battery of the remote
3. Can not Open drive
(1). The player is not powered on.
(2). Whether caused by low battery power,
automatic shutdown protection testing machine.
(Refer to the basic functions operation part of
"discharge")
4 . R o l l i n g o r c o l o r i m a g e s ( w i t h t h e T V
connection)
(1). AV output cable connections are correct, as
well as the contact plug in place;
(2). The local color by setting the standard TV
format with the same, please choose your color TV
standard.
5. mosaic, lock play and stop, no response to
key
(1). Check whether the disc exist scratches, dirt or
deformation ;
(2). Whether caused by low battery power;
(3). Please reboot and operate on the normal way.
is nearly exhausted.
11