Naxa NAS-3037 - Manual (Page 5)

Page 4
Bluetooth Speaker Instruction Manual
connection list, or it will make the one in same name can not be
connected.
10. The Bluetooth speaker user name is: NAPOLI, the password is: “0000“.
Points to keep your Bluetooth energetic

The hands free function can only be worked in the Bluetooth mode.

The Bluetooth speaker has a anti signal disturb design, but it will still be
interrupted by the high frequency device or within electromagnetic field.
Avoid to put it in such kind of environment.
 Different user port will make difference on the transmission distance.
Please use the qualify Bluetooth port.
 Some cell phone music player device does not have smooth cache, and
it will be a slightly “POP“ tone when pause, it‘s a normal sound.
 The disconnection of Bluetooth is not a real time operation, and it will be
a few seconds delay from the cell phone operation.
 When Bluetooth match is failed, delete other Bluetooth device in the
connection list, restart the Bluetooth speaker and search the signal again.
 If speaker makes a loud electronic noise, or when charging by USB port,
the red, green, blue indicator light flashes in turn, please check for the
battery shrapnel, or if any damage in the battery.
 It must install a Bluetooth media player in the computer when PC using
the Bluetooth speaker.
 Please pull out the AUX-in cable before connecting to the Bluetooth
speaker, to make sure the connection is correct.
 The speaker sound effect is affected by battery capacity, cell phone
performance and input media source quality. If noise, user can download
some ““0dB” music for test in AUX-in mode, in the distance of 1m.
 If speaker will not be used for a long time, please keep charge once per