Naxa NID-7007 - Manual (Page 15)

Page 14
 Never leave the battery fully discharged for a long period of time.
 Always keep the device and the battery away from heat.
Charge battery
Plug the power adapter into an electrical wall outlet, and then connect to the device to fully charge the battery before use (A full charge takes about 6
hours in the status of "off").
You cannot charge the battery using the USB cable.
When fully charged, the battery icon displays as .
A fully discharged battery takes approximately 6 hours to fully charge in the status of "off", but you can use the device while plugged in when desire
IMPORTANT SAFETY PRECAUTIONS
Always follow these basic safety precautions when using your tablet. This will reduce the risk of fire, electric shock, and injury.
 Do not expose this product to rain or moisture.
 Keep the device out of direct sunlight and heat sources.
 Protect the power cord. Avoid being stepped or don't put object on the power cord when make charging. Pay more attention to the point where the
cord attaches to the device.
 Please use the AC adapter included in the device packaging. Using any other power adapter voids your warranty.
 Do not disassemble the device by yourself. Any damaged by your own is out of warranty.
Appendix : The optional parts and models
Parts name Parts type
3G Wireless
Network Card
TD-CDMA TD368
WCDMA
HUAWEI E220
HUAWEI E230
HUAWEI E160X
HUAWEI E169G
HUAWEI E1750
HUAWEI E173
HUAWEI W8
HUAWEI E153
HUAWEI E153u6
VW718/719
Alcatel AL720
ZTE MF190
ZTE MF110
ZTE MF210
SEW868
UW100
CDMA2000
Bora 9380
AWIT-U8
RATE EC186
ZTE AC2736
SEV759