Naxa NPD-952 - Manual (Page 9)

8
POWER
Plug in the AC/DC ADAPTOR, the POWER ON
INDICATOR will light up in red.
Slide the POWER ON/OFF KEY towards the right
to switch the unit on. The POWER ON INDICATOR
will turn to GREEN showing that the unit is in
working mode.
“No Disc” will show up on the LCD SCREEN if no
disc has been loaded.
When a disc is loaded “Loading” will indicate on the
LCD SCREEN.
MUTE
When a disc is playing, press this key to turn off
the volume completely. Press the key again to turn
on the volume.
NUMBER KEYS ON THE REMOTE CONTROL
UNIT
Press any one of these keys or, for 10, press a
combination, to select the desired track to be
played.
For example, to select track 25, first press 2, then
within 2 seconds press 5.
SET UP
Refer to the “Features Set Up section” of this
manual
MENU
When playing DVDs, press this key to show the
Root menu of the DVD disc.
TITLE
Use this key to select the desired title to be played.
Note, this feature can only be used on DVDs that
are set up with title or chapters.
FF (FAST FORWARD)
Press to fast forward 2x, 4x, 8x or up to 20x speed.
Press PLAY/PAUSE to resume normal playback
speed.H
FB (REWIND)
Press to rewind 2x, 4x, 8x or up to 20x speed.
Press PLAY/ PAUSE to resume normal playback
speed.
PREV
During playing, press the PREV button to go back
to the start of the previous chapter. Each press of
this button will skip a chapter until the start of the
disc.
NEXT
Each press of the NEXT button during playing will
skip the current chapter and
play the next one.
REPEAT
Press to repeat a specified title, chapter, track or to
repeat the entire disc.
A-B
Repeat a section between points A and B within a
Title / Chapter / Track.
1. Press the A-B button to choose a starting point A.
2. Press the A-B button again to set an ending
point B and complete the setting. The selected
section A-B will be repeated.
3. Press the A-B button the third time to cancel and
exit, the Repeat OFF will display on the screen.
AUDIO (LANGUAGE / CHANNEL)
When playing DVD discs, press AUDIO to switch
languages.
When playing CD discs, press AUDIO to switch
between Stereo/Right Channel/Left Channel/ Mixed
Channels
PROGRAM
This function only works on CD or JPEG.
The CD must be in stop mode. Go to EDIT MODE,
then tick the order in which you want your tracks to
play. Once selected, go to PROGRAM VIEW, then
press PLAY/PAUSE to play the program selection.
ANGLE
During playback mode, use this key to switch
between different angles of the same image, Note,
this feature works only on discs that have multi-
angle encoding.
SUBTITLE
Use this key to select subtitle display on a DVD or
VCD.
The subtitles will automatically be displayed if its
not in the player’s list of subtitles supported.
Note: this function will only work if the disc been
played supports subtitles.
OSD
Press this key to display information on the disc
such as disc type, elapsed time, remaining play
time etc.
GOTO
Use this key to go to a specific title, chapter or time
on a DVD.
SOURCE
Press source Key switch CARD/USB when reading
disc.
Basic operation