Naxa NF-901 - Manual (Page 14)

13
INITIAL SETUP
- There is a setup menu for the initial setting.
- Once the initial programming is entered it is retained in memory until changed, the player can
always be operated under the same conditions.
- The settings will be retained in the memory until the settings are changed even after setting
the player to off.
- Select the SETUP icon in the main menu to enter setup menu.
- Press the UP/DOWN button to select different item, press ENTER button to confirm.
- Press the LEFT/RIGHT button to adjust.
1. Transition Effect (Slide mode picture effects):
You can select RANDOM, NONE, ZIGZAG TOP, ZIGZAGBOTTOM, BOX, BLINDS (LR),
BLINDS (TD), SPIRAL, BARDOOR (TD), BARDOOR (LR), CROSS, CROSS COMB, STRIPE
(TD), MASK, DISSOLVE, BAR ,PUSH(LR), DIAGONAL(LB2RT), DIAGONAL (RB2LT), FADE,
BRICK, CHECHER (CENTER), STRETCH(TD).
2. Slideshow Interval
This item can adjust the interval time between the playing pictures. You can select the interval
time from Random, 3/ 5/ 7/ 10/ 15/ 20/ 30 seconds, 1/ 10/ 30 minutes, 1/ 2/ 4/ 8/ 12 hours, 1
day.
3. Reset
This item is the factory default setup. If you select this item, then press ENTER button to
confirm, the screen will display as follow:
“Yes” is go to the factory reset. “No” is cancel.
Press ENTER button to confirm.