Naxa NF-502 - Manual (Page 11)

Page 10
5. Adjust the brightness
The brightness of the unit could be adjusted, you can adjust it to suitable. When it is sliding the
picture, you can adjust the level of the BRIGHTNESS.
1) Press DOWN navigation button, the screen will display:
2) Press LEFT/RIGHT button to adjust it.
3) Press MENU button to exit.
6. Select PICTURE INFORMATION in the tool bar, then press ENTER to display the picture
information.
LOGO OPERATION
This unit can set the startup screen logo. (Only in NOR flash mode)
Once you read the pictures in Nor flash, you can operate them, and set a piece of picture to be
startup screen logo.
-First, enter the miniaturized picture.
-Then, select the picture you want to set as starting logo pressing DOWN navigation button.
The screen will display as below:
- Press UP/DOWN button to select “LOGO” or “DEL”, and confirm with ENTER button.
NOTE: You cannot copy the pictures from Nor flash to CARD/USB.
BRIGHTNESS
Picture information