Operation – Naxa NAM-984 User Manual

Page 3

Advertising
background image

 

Page  2  

Operation  

Receiver  

1. Plug  the  power  cord  into  an  AC  outlet.    
2. Switch  the  Power  to  “on”  
3. Fully  extend  the  Antenna,  60  to  90  Degrees  
4. Plug  the  supplied  cord  to  the  “Audio  Output  Jack)  on  the  unit  and  connect  the  other  end  to  a  audio  

mixer  or  amplifier  

5. Please  make  sure  that  the  volume  is  set  to  minimum  to  avoid  possible  damage  

Wireless  Microphone  Transmitters  

1. Unscrew  the  battery  compartment  cap  and  insert  a  9V  battery,  observe  correct  polarity  as  marked,  and  

screw  the  cap  back  on  the  microphone.    Make  sure  that  the  cap  is  screwed  on  completely.  

2. Turn  on  the  microphones  by  sliding  the  On/Off  switch  to  the  “ON”  Position.    The  LED  light  on  the  

microphone  and  receiver  should  turn  on  simultaneously.  

The  wireless  microphones  are  color  coded  with  a  red  and/or  green  band  as  well  as  the  LED  light  on  the  wireless  
microphone,  the  receiver  has  “A”  (MIC  WITH  GREEN  BAND)  AND  “B”  (MIC  WITH  RED  BAND)  LED  lights  to  
indicate  which  microphone  is  on.    

 

1. Microphone  
2. LED  indicator  light  
3. On/off  switch  
4. Battery  cap  

Advertising