Naxa NPB-257 User Manual

Page 3

Advertising
background image

Note:

To ensure good system performance, wait until the disc tray completely reads the disc

before proceeding.

If no disc is loaded into the compartment, or the disc is placed upside down, the display will

show NOd.

PLAYING A DISC

1. Press the PLAY/PAUSE/USB button to start playback.

The playback starts from track 1, the “ ” indicator is shown on the display.

To interrupt playback, press the PLAY/PAUSE/USB button. The “ ” indicator will flash on

the display.

To resume playback, press the PLAY/PAUSE/USB button again.

2. To stop playback, press the STOP

button, the total number of tracks appears

on the

display.

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track

Press the CD NEXT or BACK button repeatedly in the stop mode or during play until the

desired track appears on the display.

Press the PLAY/PAUSE/USB

button to start play.


To search for a particular passage during playback
(track scanning at high speed)

Press and hold the CD NEXT or BACK button to scan the current playing track at high speed

until desired point passage, and then release the button. Playback will start again from this

point.

To select a song which track number exceeds 10 (for MP3 disc only)

To select a song/track which number exceeds 10, Press the FOLD+/+10 button each time to

skip forward/backward 10 tracks, then press the NEXT or BACK button to select desired track.

For example: to select the 17

th

track, press FOLD+/+10 button, and then the NEXT

button six

times immediately.

To Select A Desired Folder (for MP3 disc only)

Note:(if the MP3 disc contains more than one folder)

Press and hold the FOLD+/+10 or FOLD-/-10 button more than 1 second to skip next/previous

folder. Until the desired folder number appears on the LCD display, then release the button,

PROGRAM TRACKS

Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3

99 tracks can be stored in the memory in any order.

1. In the stop mode, press the PROG./P-MODE button, the PROGRAM will flash and the

P01

will be show on the display.

2. Press the CD NEXT or BACK button to select the first desired track to be programmed.

3. Press the PROG./P-MODE button to enter. The display changes to show

P02

.

4. With MP3 disc,keep pressed FOLD-/-10 or FOLD+/+10 button to select the desired album.

5. Repeat steps 2 & 3 to store other desired tracks for CD until all tracks are programmed.

Repeat steps 2,3 & 4 for MP3.

6. Press the PLAY/PAUSE/USB button to start playback from the first programmed track.

7. Press the STOP button to stop program playback.

To Erase the Memory (Program)
To clear the program, you have two options:

1. Press the STOP button when the disc is stopped, or

2. Open the CD compartment lid, program will be erased.

REPEAT PLAY

To Repeat a Single Track

1. Press the PROG./P-MODE button once in the play mode, “REPEAT” will flash on the display.

The current track will be played repeatedly until the STOP button is pressed

2. Press the PROG./P-MODE button until the “REPEAT” disappear.

To repeat all the Tracks
1. Press PROG./P-MODE button twice in the play mode, “REPEAT” shows steady on the

display, all tracks on the disc will be played repeatedly until the STOP button is pressed.

2. To cancel repeat play, press the PROG./P-MODE button till the “REPEAT” disappear.

To repeat current Directory (for MP3 only)
1. Press PROG./P-MODE button third in play mode, “REPEAT FOLDER ” shows steady on

the display, The current directory will be played repeatedly until the STOP button is

pressed.

2. Press the PROG./P-MODE button till the “REPEAT FOLDER ” disappear.


RANDOM PLAY

Press the PROG./P-MODE button in the play mode till the “RANDOM ” shows steady on the

display, the random play will start from next track automatically(or press CD skip forward

button), until all tracks are played over and then stop. Press the PROG./P-MODE button once

to cancel.


INTROSCAN PLAY

for CD disc only

Press the PROG./P-MODE button in the play mode till the “INTRO ” shows steady on the

display, the unit will start to play the first 10 seconds of music of each track , until all tracks are

played over and then stop. Press the PROG./P-MODE button once to cancel.

LISTENING TO USB

USB PLAYBACK

The USB input jack is compatible with a data flash memory key, it is not guarantee the

compatibility with MP3 players with proprietary software.

1. Press and hold the PLAY/PAUSE/USB button to select USB playing mode while the

FUNCTION switch on main unit is set to CD/MP3/USB position.

2. Connect the USB to the USB INPUT. The CD will display total number of tracks stored

inside the USB.

3. Press the PLAY/PAUSE/USB

button to start playing. Press the PLAY/PAUSE/USB button

once again to temporarily stop.

4. Press the STOP button to stop playing. The display will show total number of tracks.

5.

The function are the same as per MP3 playback.

6. To exit USB operation, press and hold PLAY/PAUSE/USB button to return the CD mode.

4

5

Advertising