Connecting to pc, System configuration, Low power – Naxa NMV-169 User Manual
Page 4: File storage
User Manual
Version 1.1
Page 3
BATTERY CHARGE:
The MP3 Player contains an internal 3.7V rechargeable battery that needs to be charged
before using. When it is fully charged, this “fully charged” icon ( ) will be displayed in
the upper right-hand corner of the device’s LCD display. With use, the battery’s charge will
diminish.
When the battery capacity icon appears blank and begins to flash, this is a low battery
indication and the battery’s current is near empty. When this occurs, it is necessary to
re-charge the battery.
BATTERY SYMBOL FROM EMPTY ( ) TO FULL ( )
Whenever you cannot turn the unit on, battery must be re-charged.
Connecting to PC
System Configuration
OS: Windows XP/2K/ME/98 (driver installation needed) /Linux9 and above /Mac OS 10
CPU: Pentium-133MHz at least
Memory: 32MB at least
Hard disk free space, 100MB at least
Video card: above 640*480, enhanced color at least (16 bits)
Connecting to PC
Connect the player to PC with the USB cable in power-off/on status; Disconnect the USB cable or
delete the hardware on the PC, the system enters player’s operation mode.
If do not disconnect USB cable, the system will stay in charging mode on its operation interface.
Low Power
When battery power is low, the player will prompt and enter Standby automatically. Please don’t
power on the player now, charge it instead.
Charger current specification recommended: 400-500mA.
File Storage
Files of different types should be stored under different directories. For example, music file should
be stored under MUSIC dir. Record file stored under RECORD dir... Otherwise the applications
unable to find the corresponding files.