Naxa NCD-730 - Manual (Page 12)

Page 11
Radio operation
Radio Operation
1. To enter RADIO mode(MODE button or RADIO icon)
When you use MODE button or source menu (tapping RADIO icon) to enter RADIO
mode, it will display radio interface as follows:
* Some icons on radio interface correspond with the buttons on remote control or control
panel as follows:
SWF icon = SW button(remote control)(long pressing)
LOUD icon = EQ button(remote control)(long pressing)
icon = MUTE button
and icons = VOL- and VOL+ buttons = VOL knob
EQ icon = EQ button
: To enter source menu.
2. To switch between bands (BAND)
The BAND icon or button can switch between bands of FM1, FM2, FM3, AM1(MW1) and AM2
(MW2), and the word FM1,FM2,FM3,AM1(MW1) or AM2(MW2) will be displayed on screen.
3. To search for a station ( < and > icons or v and ^ buttons)
1) Long touching < or > icon or long pressing v or ^ button on remote control can automatically
search down or up for an available station beginning from the current frequency.
2) Briefly touching < or > icon or briefly pressing v or ^ button on remote control can manually
search down or up for a your desired station beginning from the current frequency.
4. To preset and scan all memory stations (APS icon or A/PS button)
1) When long touching APS icon or long pressing A/PS button on remote control , the radio
searches from the lowest frequency and checks the signal strength level until 1 cycle
search is finished, and the 6 strongest stations are preset to corresponding preset
number memory bank for the current band.
The presetting function can be implemented in selected FM or AM(MW) band. (It can presets
3x6 stations for FM and 2x6 stations for AM(MW) in all)
2) When briefly touching APS icon or briefly pressing A/PS button, the radio scans
for each preset station in FM or AM(MW) band from NO.1 bank, each preset station broad-
casts for 5 seconds. After finishing a circle of scanning, it will resume broadcasting the
station in NO.1 bank.
NOTE: In FM band, FM1,FM2 and FM3 are preset and scaned as one band at a time;
In AM(MW) band, AM1(MW1) and AM2(MW2) are preset and scaned as one band at a time.
DX DX ST ST USER USER SWF SWF
FM1 FM1
107.00 107.00
MHZ MHZ
55
CH CH
1 1
2 2
3 3
4 4
5 5
6 6
87.50 87.50
90.00 90.00
98.00 98.00
86.60 86.60
107.00 107.00
106.00 106.00