Naxa NID-7004 - Manual (Page 14)

12
4. Setting the item for network connection
Connecting to wireless Wi-Fi.
Select Wi-Fi in the item “wireless operation and network” to reach the
Wi-Fi setup interface, and make sure the item “network notifier” is
selected.
Among the items for Wi-Fi network, you can select the name of Wi-Fi
network. If this network is encrypted, a password box will pop up after
your selection. You can enter the password here and then click the
connection button. After a while, your system will be connected to Wi-Fi
(when the network signal is strong enough).
4.1 Connecting to 3G
First insert the 3G NIC. when the system indentifies the 3G NIC, it will
open the app for 3G network setup . At the time, you can select 3G
network to open the gateway.
4.2 ADSL dial-up
Enable the cabled connection: Access to the related interface to set the
cable network and make sure this item is selected. Open the ADSL dial-up
app and enter the user name and password in the respective fields. Then
click the item for connection.