Naxa NF-588 - Manual (Page 3)

1."[M]" power/ menu button: A. Short press it to display the main menu. (The following is
instituted menu key). B. Press it to confirm when an item is selected. C. Press and hold it
for about 3 seconds to power on or off the player.
2. [ ] Select: Move up browse or upward choice (The following is instituted UP key).
3. [ ]Select: Move down browse or downward choice (The following is instituted DOWN
key).
4. Reset hole: Re-initialize the system of the unit.
Charging the battery
When you use the device for the first time, connect it with the computer via a USB cable
for charging. The first time for charging should be up to five hours. The standard charging
time is three hours.
When you connect it with the computer via a supplied USB cable, the player will charge
automatically and you can see the charging progress via battery icon at the top left corner
of the window screen.
Please note:
- Make sure that the battery is fully charged before the first use.
- Please fully charge the battery every two or three months if the player is not being used
for a long time. Otherwise, the saving time set will be lost.
-Please recharge the battery when the battery icon shows the power is empty.
OPERATION INSTRUCTION
Power on
In the power off mode, press and hold the [M] key to power on the player. The screen will
be turned on.
Power off
Press the [M] button. Then you will find the main menu. Press the [ ] or [ ] button to
select “Power Off”. Press the [M] button to enter submenu and press [ ] or [ ] to
choose “YES”; press [M] to confirm. The unit will be turned off. Or you can press and hold
[M] to power off the player directly.
Picture Browsing
• When the photo frame is powered on, it will start to play the pictures directly, the
picture-browsing mode is default.
• If no picture is downloaded in the photo frame, the screen will display ”No Photo”.
• Press the [ ] or [ ] button to browse the previous or next picture.
• During browsing the picture, press the [M] button to enter the main menu. Press the
[ ] or [ ] button to select “Slide Show”. And then press the [M] button to enter the
next menu. Press the [ ] or [ ] button to set the interval time of each picture in a slide
show(0-15 seconds).
Main Menu Specification
During browsing the picture, press the [M] button to enter the main menu, the menu will
display as below:
• USB Connect: Select to connect the photo frame with the
computer.
• Slide Show: To select the display mode.
• Auto Off: To set the auto power off time.
• Power Off: To select turn off the player.
• LCD Contrast: To adjust the contrast of the screen.
• Backlight: To adjust backlight of the photo frame
• Clock: to set the clock display mode.
USB Connect
Connect the photo frame to the computer with the provided USB cable, and then press [M]
to enter the main menu. Press [ ] or [ ] button to select the "USB Connect" option.
Press the [M] button to enter. Select “Yes” and press [M] to confirm, the screen will display
“USB CONNECTED”.
Slide Show
Press the [ ] or [ ] button to select "Slide Show" option from the main menu and
press the [M] button to enter the submenu. Press the [ ] or [ ] button to adjust
interval time of each picture. There are 0-15 seconds different interval times for selection.
Press the [M] key to confirm; photos will be played automatically.
If the interval time is set as “0”, you can browse the picture manually by pressing [ ] or
[ ] button.