Naxa ND-856 - Manual (Page 6)

Television
Composite Video Input
Composite Video Output
RCA Stereo Audio Output
1. Use the Composite Video Output to send video from
the DVD player to a television.
2. Requires an RCA video cable (included).
3. Use the RCA video cable to connect the Composite
Video Output to a composite video input on a television.
4. Adjust the connected televisions input setting to match
the input used in the previous step.
Note: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Note: Both video and audio connections must be made from the DVD player to your television.
1. Use the RCA Stereo Audio Output to send audio from
the DVD player to a television.
2. Requires an RCA audio cable (included).
3. Use the RCA audio cable to connect the
RCA Stereo Audio Output to an RCA stereo audio input
on a television.
4. Adjust the connected televisions input setting to match
the input used in the previous step.
RCA Stereo Audio Output
1. Use the Coaxial Digital Audio Outputto send high
quality audio from the DVD player to an audio system.
2. Requires an RCA audio cable (included).
3. Use the RCA audio cable to connect the Coaxial Digital
Audio Output to an coaxial digital audio input on an audio
system.
4. Adjust the connected audio system’s input setting to
match the input used in the previous step.
5. In the Digital Out portion of the setup menu, adjust to
PCM, RAW or off
Television
RCA Stereo Audio
Inputs
Connecting Video and Audio
Plug the attached AC cord into a standard AC power outlet to power the DVD player.
Power
Audio System
Coaxial Digital Audio Inut
5