Naxa NCD-707 - Manual (Page 19)

-17-
UNIT KEYS
Control Panel
2. and VOL KNOB
During playback e VOL knob
SEL BUTTON
, th is used to increase or decrease the volume.
To switch between BASS,TREBLE,BALANCE, FADE,COLOR,BRIGHTNESS,
CONTRAST, TINT and VOLUME, briefly and repeatedly press the SEL button.
After switching on the desired mode above, rotate VOL knob or press VOL+/
VOL- buttons to set it.
To switch between LOUD, SWF, EQ, DX/LOCAL(in radio mode), STEREO/MONO
(in radio mode), TIME 12H/24H, CLOCK, BUZZ,EUR/USA FREQ,ANIMATION,
BG and LED COLOR, long press SEL button to switch on LOUD, then briefly and
repeatedly press SEL button.
After switching on the desired mode above, rotate VOL knob or press VOL+/VOL-
buttons to set it.
1. OPEN or BUTTON
To slide the monitor out and stand it up or into the monitor slot, press this button;
To adjust the angle of the monitor, long press this button .
3. (POWER On/Off )/MODE
ress it to turn on the unit, to the .
In mode, Press it repeatedly to select RADIO ,
mode.
Short p long p it turn off unit
power on DISC, USB, CARD or
AUX IN
ress
17
15 2 3 4 5 6 7
9 1
11
10 8 12 13 14
16
_
+
18