Omnimount PAN103PRO Manual - Manual (Page 4)

DOCUMENT NO : IA‐PANA103PRO_REV.A1
INSTALLATION AND ASSEMBLY INSTRUCTIONS
ALL DIMENSIONS ‐ MM (INCH)
MODEL : PANA103PRO
MAX LOAD CAPACITY : 500 LB (227 KG)
• Remove spacers from rear of screen. Retain four (4) 16MM screws for installation of Panel Brackets.
• Secure Panel Brackets (C) to rear of screen by using the original 16MM screws along with four (4) Flat
Washers (I) and four (4) Locking Washers (J).
CAUTION
• Ensure that each fastener is tight and secure prior to preparing panel to lift and hang in position.
SETTING AND ADJUSTING TILT POSITION(S) / VERTICAL AND LATERAL ADJUSTMENT