Vitek VT-3523 - Manual (Page 5)

WAKING UP TO THE RADIO
• Set the alarm time as
instructed above.
• Set the Auto/Off/On (1)
selector to the On position.
• Set the band selector to the
desired band - AM/FM, use
the TUNING dial to tune to
the desired radio station and
make sure that the volume is
set properly.
• Set the Auto/Off/On (1)
selector to Auto. At the set
alarm time the radio will auto-
matically activate.
WAKING UP TO BUZZER
ALARM
• Set the alarm time as indicat-
ed above.
• Rotate the VOLUME (12) dial
counter-clockwise until it
clicks in order to activate the
BUZZ alarm mode.
• Set the Auto/Off/On (1)
selector to Auto. The buzzer
alarm will activate at the set
alarm time.
TURNING OFF THE ALARM
• To turn off the alarm, press
the AL OFF (5) button once;
the alarm will turn off and the
set alarm time is saved for
the next day.
• To turn the alarm off com-
pletely, set the Auto/Off/On
(1) selector to the Off posi-
tion.
SNOOZE FUNCTION
• You can temporarily silence
the alarm (buzzer or radio) by
pressing the Snooze (9) but-
ton; the alarm will automati-
cally activate again in 9 min-
utes.
SLEEP TIMER
• Set the Auto/Off/On (1)
selector to the Auto position.
• Press the SLEEP (7) button;
the radio will activate and the
timer will begin counting
down from 59 minutes until
radio shut-off.
• To change the shut-off time,
press and hold the SLEEP (7)
button and then use the MIN
(3) button to set the desired
shut-off time from 59 to 1
min.
• Press the Snooze (4) button
to deactivate this function.
RADIO
• AM band reception uses an
internal antenna; when tuning
a radio station, turn the radio
itself in order to achieve opti-
mal reception.
• For best reception in the FM
band, make sure that the FM
antenna wire is fully extend-
ed.
• Set the ON/OFF/AUTO (1)
button to the ON position.
• Set the desired volume using
the VOLUME (12) dial.
4
ENGLISH
3523_14.qxd 16.03.05 13:31 Page 4