RBP Chemical Technology J1098 PLATE FINISHER & PRESERVER User Manual

Plate finisher & preserver, Product data sheet, Description

Advertising
background image

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

RBP Chemical Technology, Inc.

150 S. 118

th

Street P.O. Box 14069

Milwaukee, WI 53214-0069

www.rbpchemical.com

Corporate: 414-258-0911

Fax: 414-258-7908

RBP East: 508-865-0800

This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.

Product Data Sheet

Date: 08/18/11

Supersedes: 09/07/10

PRODUCT #: J1098

PLATE FINISHER & PRESERVER

Non-Asphaltum Storage Gum

Description:

A non-asphaltum storage gum specifically designed for silver emulsion metal plates.
PLATE FINISHER & PRESERVER will not affect the imaged emulsion. It contains
special ingredients to keep the non-image area water-loving and the image area ink-
receptive. PLATE FINISHER & PRESERVER can be used as a long-term storage gum as
well as an overnight plate preserver.

Directions for Use:

1.

Dampen plate with water.

2.

Clean ink from plate with a non water miscible press wash, such as RBP’s

SURE WASH.

3.

Wet wash plate with water

4.

Apply a liberal amount of PLATE FINISHER & PRESERVER with a dampened

cloth or sponge.

5.

Wipe off excess and let air dry. Do not buff.

Specifications:

Appearance:

Light brown emulsion

Density:

8.9 lbs/gal

VOC Content:

(EPA Method 24)

0.4 lbs/gal, 48 g/L, 5%

Flash Point:

None

Advertising