RBP Chemical Technology J5152 PLATINUM 8200 User Manual
Platinum 8200, Product data sheet, Description
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
RBP Chemical Technology, Inc.
150 S. 118
th
Street P.O. Box 14069
Milwaukee, WI 53214-0069
www.rbpchemical.com
Corporate: 414-258-0911
Fax: 414-258-7908
RBP East: 508-865-0800
This product should be used only for its intended purpose. The information stated above is based on our laboratory tests and
experience, and is accurate to the best of our knowledge. Since actual use is beyond our control, the recommendations or
suggestions are made without warranty, expressed or implied.
Product Data Sheet
Date: 07/18/11
Supersedes: 08/26/10
PRODUCT #: J5152
PLATINUM 8200
Low Dosage Acidic Fountain Concentrate
Description:
An acidic fountain concentrate designed for web presses equipped with brush or
spray dampening systems. PLATINUM 8200 contains a blend of desensitizing and
buffering agents to keep the non-image area free of ink. It also contains a mixture of
wetting components that provides excellent ink and water balance. PLATINUM 8200
is compatible with all new types of baked or unbaked CTP plates.
Directions for Use:
Mix 2 to 4 ounces of PLATINUM 8200 to each gallon of water. A good starting point
is 4 ounces/gallon. Increase dosage if plate sensitivity such as tinting or toning
occurs. Decrease dosage if ink emulsification or ink roller stripping problems appear.
The conductivity will increase by approximately 700 micromhos for each ounce of
PLATINUM 8200 over the water’s.
Specifications:
Appearance:
Clear blue-green liquid
Density:
9.2 lbs/gal
Conductivity:
700 micromhos per ounce
pH, diluted:
3.5-4.5
VOC Content:
0.9 lbs/gal, 108 g/L, 10%