Hyundai H-CMD7071 - Manual (Page 13)

13
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press REL button and remove the panel, then press RESET button to restore the unit to the original factory settings.
Power button
Press any button to turn the unit on. Press POWER button to switch the unit off.
Note: After the unit is off, the clock, volume level and radio current settings will be memorized, and when you turn the unit on it will
resume the stored status you set.
Volume adjustment
Rotate VOL knob on the panel clockwise or press VOL+ button on the RC to increase the volume level; rotate anticlockwise or press
VOL- button to decrease the volume level.
Mute function
Press MUTE button to cancel the sound. Press again to resume.
Mode selecting
Press MODE button repeatedly to select the mode: RADIO => DISC (the type of disc inserted) => USB (if any is inserted) => CARD
(the type of card inserted).
Subwoofer control
Press and hold BAND/NP/SUB button on the panel to turn the Subwoofer output ON. An external amplifier is required to operate a
subwoofer.
Sound settings
Press SEL button shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL => FAD => LOUD => LOC => ST =>
EQ=> COLOR 1. Rotate the VOL knob or use VOL +/VOL- buttons to adjust each mode.