GIGABYTE GA-MA78LMT-S2H - Manual (Page 37)

- 37 - BIOS Setup
(Note) This item appears only if you install a CPU that supports this feature.
CPU core 2
Enables or disables CPU Core 2. (Default: Enabled)
CPU core 3 (Note)
Enables or disables CPU Core 3. (Default: Enabled)
j Only for GA-MA78LMT-S2H
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Clock Calibration
hi : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level 
Internal Graphics Mode [UMA]
UMA Frame Buffer Size [Auto]
x Surround View Disabled
Onboard VGA output connectj [D-SUB/DVI]
VGA Core Clock control [Disabled]
x VGA Core Clock(MHz) 350
IGX Configuration
Internal Graphics Mode
Allows you to determine whether to allocate system memory for the onboard graphics controller.
Disabled Disables the onboard graphics controller.
UMA Allocates memory for the onboard graphics controller from the system memory. (Default)
UMA Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics con-
troller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 128MB,
256MB, 512MB.
Surround View
Enables or disables the Surround View function. This option is configurable only if Init Display First is
set to PEG and an ATI graphics card is installed. (Default: Disabled)
Onboard VGA output connect
j
Specifies the graphics display of the onboard VGA output from the D-SUB/DVI-D or D-SUB/HDMI.
D-SUB/DVI Sets the D-SUB/DVI-D as the graphics display. (Default)
D-SUB/HDMI Sets the D-SUB/HDMI as the graphics display.
VGA Core Clock control
Enables or disables the control of VGA Core clock. (Default: Disabled)
VGA Core Clock(MHz)
Allows you to manually set the VGA Core clock. The adjustable range is from 200 MHz to 2000 MHz.
This item is configurable only if the VGA Core Clock control option is enabled.