Soft dB I-Track User guide - Manual (Page 24)

22
6.2.5 Display
The display interface allows setting several display parameters.
These parameters are:
• Spectrum: 1/1 Octave, 1/3 Octave or FFT;
• Weight: A, C or Z (no weight);
• Bandwidth: Low and high frequency range to consider. The global level is computed on this
frequency range;
• Displayed Value:
• Pressure, Intensity or PI index;
• Global level or single frequency;
• Color Scale:
• Manual Range: the user sets the maximum and minimum values of the color range;
• All Data: the maximum and minimum values in the map are used to define the
maximum and minimum values of the color range;
• 10, 5 and 3 dB MS: Sets the color range to the most significant dB of the map. As an
example, if the maximum value of the map is 93.8 dB and the 5 dB (MS) setting is
selected, the color scale will range from 88.8 to 93.8 dB.
• Display Sign: Allows the user to select the displayed intensity sign :
• Positive Only;
• Negative Only;
• Both Signs (Absolute).
• Transparency: Sets the transparency of the sound map over the background image;
• View Grid: Displays the computing grid on the map;
• View Points: Displays the measurement points on the map;
• View Tracks: Displays the scanning tracks on the map;
• View Triangles: Displays the triangular interpolation structure on the map.