Spicer DRIVELINE COMPONENTS CATALOG SLIP YOKE ASSEMBLIES - Manual (Page 8)

J300P-3
Slip Yoke Assemblies
LD & MD Driveshaft Style
Boot Kit Assy Slip Yoke
C/L to End C/L to Face Lube Dust Cap Slip Yoke Part Number Assembly
of Spline of Plug Fitting & Washer Kit Plug Number Order Separately Style Part Number
J F Part of Slip Yoke Assembly
Important: See Safety Information in General Information Section (J300P-GI)
8 Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
Important: See Safety Information in General Information Section (J300P-GI)
1410 SERIES (Continued) E-4.438 D-1.188 USE KIT 5-160X OR 5-801X
1.500-16 Spline (Continued)
6.688 1.344 500174-1 D3B 3-68-33 — SR 3-3-798KX
7.812 1.344 500174-1 — 3-68-33 — SR 3-3-4551X•
7.812 1.344 500174-1 D3A 3-68-33 — SR 3-3-508KX
7.812 1.344 500174-1 211158X 3-68-33 — SR 3-3-5481KX
7.812 1.344 — — 3-68-18X — SR 3-3-838X
Use dust cap D3F, order separate; Use lube fitting 500174-1; order separate
8.562 1.344 500174-1 D3J 3-68-113 — SR 3-3-1831KX
1.528-23 Involute Spline
6.810 1.312 — — 3-68-163 — SR 3-3-6641X•
Use dust cap 211158X, order separate; 500174-1 lube fitting, order separate
1.562-16 Spline
6.812 1.312 500174-1 D3H 3-68-163 — SR 3-3-1701KX
For splined dust cap, use D3J
1.564-22 Based On 24 Involute Spline
6.720 1.220 — — 500166-26 212007X SR 3-3-6041X•
OEM Only
1.587-23 Based On 24 Involute Spline
6.720 1.220 — — 500166-26 212007X SR 3-3-7001X
1.605-15 Involute Spline
5.750 1.344 500174-1 D4G 3-68-163 — SR 3-3-3871KX
1.654-20 Involute Spline
4.812 1.312 — — 3-68-183 — SR 3-3-3791X
Hub dia. not ground
1.750-16 Spline
3.250 1.188 500174-1 D4F 3-68-54 — SR 3-3-1511KX
1480 SERIES E-4.438 D-1.375 USE KIT 5-188X, 5-803X OR 5-804X
1.562-16 Spline
6.000 1.312 — — 3-68-163 — SR 3-3-5141X•
6.812 1.312 500174-1 D3J 3-68-163 — SR 3-3-1601KX
9.500 2.000 500174-1 D3H 3-68-163 — SR 3-3-1641KX
1.564-23 Based On 24 Involute Spline
6.810 1.312 — — 500166-26 212007X SR 3-3-6061X
1.587-23 Based On 24 Involute Spline
6.810 1.312 — — 500166-26 212007X SR 3-3-7021X
1.784-27 Involute Spline
3.719 1.109 — — 3-68-203 — SR 3-3-3121X
Hub dia. not ground
2.250-10 Spline
3.719 1.188 500174-1 D3D 3-68-93 — SR 3-3-1621KX