Spicer 2007 Spicer Driveshafts Service Manual User Manual
Page 24
22
Disassembly and Reassembly
Midship Nut Specifications Table
Disassembly - Outboard Slip Style
1.
Mark the slip yoke barrel and midship tube shaft with
a marking stick, paint marker, or other legible mark-
ing device. This ensures proper reassembly of the
mating components in their original phased position.
2.
Refer to original-equipment manufacturer's instruc-
tions for removal of the coupling shaft.
3.
Visually inspect midship tube shaft, looking for wear
on spline surface. If splines are damaged, missing or
twisted, or Glidecote® is missing, replacement of
entire coupling shaft is necessary.
4.
On some Spicer center bearing assemblies, a metal
retainer spans the outside center bearing bracket. If
the metal retainer is present, remove it and discard.
5.
Remove and discard the center bearing bracket.
6.
Remove and discard the rubber cushion.
Series
Nut
Nut
Washer
Head Size
Nut Torque
Part Number
Catalog Color
Part Number
N•m
lbs. ft.
1310 231781
cadium
plate
& wax
230123-12
230123-14
15/16" 136-163
100-120
1310
(Toyota Only)
10-74-101 cadium
plate
& wax
230123-12
230123-14
15/16" 136-163
100-120
1410 16-74-101
silver 230123-15
1-5/16"
373-440
275-325
1480 16-74-101
black 230123-15
1-5/16" 542-610
400-450
1480 16-74-101
silver 230123-15
1-5/16"
373-440
275-352
1550 231502
black none 1-5/8" 644-712
475-530
1610 231502
black none 1-5/8" 644-712
475-525
1710 20-74-91
black 230123-6 1-5/8"
644-712 475-525
1710 231502
black none 1-5/8" 644-712
475-525
1760 20-74-91
black 230123-6 1-5/8"
644-712 475-525
1810 20-74-91
black 230123-6 1-5/8"
644-712 475-525