Spicer 10 Series Driveshafts - Manual (Page 65)

Minimum Length Slip Joint End Tight Joint End Assembly
Collapsed Part Number
FF-FF C L
- C L
Flange Yoke U-Joint Slip Yoke Tube Shaft Tube Yoke U-Joint Flange Yoke
Flange Face Centerline or S.S. Kit Assembly Kit or S.S.
to to (Shipping (Includes (Shipping
Flange Face Centerline Strap) Dust Cap Kit) Strap)
Series SPL 250 Tube Type Assembly
Standard Parts
Standard Tube Size 5.06" x 0.17" (128.5mm x 4.32mm)
Tube Part Number 120-30-4
J = 3.85” - (98mm) S = 4.33” - (110mm)
Tubing Formula: T = C
L
- C
L
(Collapsed) minus 15.00" - 381.0mm
17.71” S.S. SPL250X 250-82-21X 250-55-31X 250-28-17 SPL250X S.S. 250DS55006C (1)
(450.0 mm )
17.71” S.S. SPL250X 250-82-21X 250-55-31X 250-28-17 SPL250X S.S. 250DS55005C
(450.0 mm )
8
(1) Non-Standard tube size 5.12" x 0.19" (130 mm x 5 mm) Part #120-30-5
C
L
- C
L ß
J
S
SPL Series
© 2005 Dana Corporation