Spicer Drive Axles Service Manual Wheel Reduction Drive Axles (EA-50) - Manual (Page 21)

19
Ring Gear and Mount
1. Disengage ring gear retaining ring.
2. Slide ring gear off ring gear mont.
3. Pull outer bearing cone off ring gear mount
sleeve.
• A drift can be used to drive dearing off of
mount through holes in mount.
Wheel Hub
1. Pull outer bearing cup out of hub.
2. Pull oil seal and seal band out of hub.
3. Disengage inner bearing retaining ring.
4. Remove inner bearing cone out of hub.
5. Drive inner bearing cup out of hub.