Spicer Dana Corporation Steer Knuckle Recall Identification and Repair Procedure User Manual
Page 11
Advertising
![background image](/manuals/258710/11/background.png)
3. If adjustment is required, loosen jam nut and turn stop screw as necessary.
Figure 16
1 - Jam nut
2 - Stop screw
4. After adjustment, tighten stop screw jam nut to 90-120 Lbf-Ft (122-163Nm).
For spec’ing or service assistance, call 1-800-621-8084 24 hours a day, 7 days a week.
Or visit our web site at:
http://www.spicerparts.com
Dana Corporation
ABIB-0313
Copyright Dana Corporation, 2003
Commercial Vehicle Axle Division
October 2003
All Rights Reserved.
P.O. Box 321
Printed in U.S.A.
Toledo, Ohio 43697-0321
11
Advertising