Spicer Dana 44 Rear Axle Sell Sheet - Manual (Page 2)

Dana Aftermarket Group
PO Box 321 Toledo, Ohio 43697-0321
Phone: 1.800.621.8084
www.spicerparts.com Form # CRATE44-SPEC-5/12
Copyright Dana Limited, 2012.
All rights reserved. Dana Limited.
Printed in U.S.A.
For more information, please contact your local Spicer products sales representative or visit our website at www.crateaxle.com.
For dimensional measurements, visit
www.crateaxle.com/dana_44R.pdf.
When it comes to axle performance, nothing gives you peace of mind like the
Dana 44™
axle. They’re built with all original Spicer ® components, so they
meet the rigorous standards and specifications that have made Dana the
most trusted name in driveline products. In addition to an electronic locking
differential, the Dana 44 axle is also available with a Trac-Lok
® limited slip
differential or a standard (open) differential, both of which feature AdvanTEK ®
technology. With improved power density and a larger-diameter cross shaft
made from 9310 premium-grade steel, the standard and Trac-Lok differentials
offer improved fatigue life.
For more than a century, Dana has been a leader in driveline components.
Now for the first time, you can get the trusted Dana name right from the
source through our approved network of Dana Crate Axle™ Specialists.
No knock-offs, no used axles—the axle you know from the name you trust.
Differential Options: Electronic locking, Trac-Lok ® limited slip
or standard (open) differential
Lube Options: Mineral oil: 2.25 liters of gear oil SAE 80W90, or
Synthetic oil: 2.25 liters of gear oil SAE 75W140
Reference Application Guide for Dana 44™ Rear Axle
Engine
Torque
lbs.-ft
400
400
400
400
400
GVW
lbs.
5700
5700
5700
5700
5700
GAWR
lbs.
3570
3570
3570
3570
3570
GCW
lbs.
8500
8500
8500
8500
8500
Axle Ratio
3.73
4.10
4.56
4.90
5.13
Ring
Gear Size
inch
8.90
8.90
8.90
8.90
8.90
Forward
4.46
4.46
4.46
4.46
4.46
Reverse
3.16
3.16
3.16
3.16
3.16
Transmission Ratios
Size
35 in.
35 in.
35 in.
35 in.
35 in.
Max. Tire
Thicker wall tubing for increased
housing strength
Axle shaft strength increased with
larger diameter, 32-tooth spline
New differential gears with better
impact strength
New ratios available
Larger differential bearings with
improved strength and fatigue life
Larger, stronger 1330 Series end
yoke
AdvanTEK ® Technology. For more
information on AdvanTEK
technology, please visit
www.crateaxle.com/literature.
6
7
5
4
3
2
1
Dana 44 ™ Rear Axle with AdvanTEK ® Technology
2 3 4
6
5 7 1