Spicer Lubrication Manual - July 2012 - Manual (Page 3)

3
General Information
General Information
Dana Lubrication Philosophy
In promoting component reliability and longevity, proper lubrication is the key to a sound and effective maintenance program.
Without effective lubricants at proper levels, remaining maintenance procedures will not keep components functional.
We believe synthetic lubricants have proven to be superior to petroleum products and represent opportunities to promote supe-
rior maintenance and bottom line operating performance while significantly extending component service life and reliability.
Certain products and applications, as noted in this manual, require the use of approved synthetic lubricants.
A
Supplier Manual, DALSM072012. list of approved lubricants and suppliers can be found at www.dana.com/commericalvehicle in the Approved Lubricant
It is important to perform a daily pre-trip inspection of drivetrain components for lubricant leaks. Leaks should be brought to
the attention of maintenance and immediate corrective action should be taken.
Standard Drain Lubricants
Drive Axle lubricants must meet specific lubricant industry requirements. Refer to the enclosed charts to select the proper
lubricant for your application.
Extended Drain Lubricants (Synthetic Lubricants)
Extended Drain synthetic lubricants offer superior thermal and oxidative stability for extended product performance and
reliability. The superior performance characteristics of these lubricants enable Dana to offer extended drain and extended
warranties. Added benefits include a more efficient drivetrain that translates into proven fuel economy savings over mineral
based lubricants.
Synthetic lubricants are recommended for severe duty applications and in cold climates.
It is important to use the lubricants that meet the current specifications set forth by Dana. Look for the appropriate approval
code on the container.
Drive Axle - Dana Specification: SHAES-256 Rev C
Drive Axle - Dana Specification: SHAES-429
Use of lubricants meeting these specifications will ensure the highest performing lubricants for maximum performance.
Note: Dana discontinued the use of the E500 logo in 2006.