Spicer Drive Axles Illustrated Parts List 19055T_P, 21065T_P, 22065T_P - Manual (Page 13)

11
Gear and Pinion Kits
Ring Gear & Pinion Identification
Ring Gear and Drive Pinion are matched parts and must be replaced
in sets. Complete identification is stamped on both parts as shown in
the adjacent drawing. Order the Dana kit by the ratio required from the
chart below.
19055T/P, 21065T/P, 22065T/P
Drive Pinion Spline-39 Inv
2.00” Diameter
17” Gearing
For Service
Ratio Order Kit No. Ring Gear Pinion Teeth
(NSS) (NSS) No.
3.70/5.05 504063 133997 133998 37/10
3.90/5.32 121956 107507 126080 39/10
4.11/5.61 121957 107508 126081 37/9
4.33/5.91 121810 107509 126082 39/9
4.63/6.31 122146 107510 126083 37/8
4.88/6.65 121811HX 107511 126084 39/8
5.29/7.21 121812 107512 126085 37/7
5.57/7.60 121813 107513 126086 39/7
6.17/8.41 121814HX 107514 126087 37/6
6.50/8.86 121815 107515 126088 39/6
7.17/9.77 121816 107516 126089 43/6
Double Reduction - 2 Speed
Ring Gear
Pinion
Matched Gear Set Number Part Number
Ring Gear Teeth
Manufacturing Numbers
L7038 886
78 39-6 EA-93
JF-1
9
L7038
Side
Self Locking Nut
Front
Pinion Teeth
Manufacturing Numbers
Part Number
6-39 JD77
93
85405
SPICER
Ring Gear Teeth
Pinion Teeth
Indicates Genuine
Spicer Parts