Spicer HAXL-TEC-11.1 - Manual (Page 4)

Page 4 of 5
D190 AXLE HOUSING COVER:
The D190 models have a bolt on axle housing cover which is now replaced by new cover part number 134324. The original
cover 302576 was sold in service kit part number 513581 which has now been superseded to kit 504061. The 504061 kit
contains the items listed in the chart below.
AXLE HSG COVER & BRG PARTS KIT: 504061
Spicer
Part-No.
Description
Qty
Notes
134324 COVER - AXLE HOUSING 1 New cover with relocated snap ring groove
90898 PLUG 19P4 1
129492 PLUG FILL 1
131211 BEARING CONE 2
134322 SNAP RING .109 ”
1 Use with new design cover 134324
139980 BEARING CUP 2 Use cups with new design cover 134324
IMPORTANT REPLACEMENT REMINDERS AND TIPS

Always check the individual components for OEM identification numbers as you do replacements. Assembly
or mixing of wrong parts could lead to pre-mature failures. Always check compatibility of parts before final
assembly!

Use replacement charts and reference notes to determine correct replacement parts.

Check with the OEM for vehicle build data if identification of components cannot be done.

Always use Spicer Genuine replacement parts, failure to use Genuine Spicer replacement parts could lead
to pre-mature failures in assemblies and could void any existing warranty on the component or axle
assembly involved
.
U-Tube Breather Parts
Kit: 507162
D170/190 Carrier to Axle
Housing Hardware Fastener
Parts Kit: 512896
D190 Axle Housing Cover
Hardware Parts Kit: 512897
New Design Bolt-on Housing
Cover 134324
–
Sold as
Service Kit: 504061