Spicer Driveline Components Catalog - End Yokes - Manual (Page 34)

END YOKES with SPLINED HOLES
J300P-4
R Q S End Yoke Assy. Slinger/Plug Spicer
Major Ground Length Centerline C'Bore Style (includes slinger) Part Part
Diameter Hub Dia. Thru Hole to End Depth Order When Listed Number Number
32
Important: See Safety Information in General Information Section (J300P-GI)
• Part is discontinued  Part is available until supply is exhausted © Not sold separately
1610 SERIES (Continued) E-5.312 D-1.875 USE KIT 5-279X, 5-674X
FOR HR STYLE USE STRAP KIT 5-70-28X
1.960-6 Spline
1.960 2.750 3.000 5.000 — BP 5-4-2031X 330287 5-4-1431•
1.962-10 Spline
1.962 2.500 2.000 4.500 — BP — — 5-4-2541•
1.962 2.625 2.250 4.719 .250 BP 5-4-5121X 230909 5-4-1641•
1.962 2.625 2.250 4.719 .250 HR 5-4-5121-1X• 230909 5-4-1641-1©
1.962 2.625 2.250 4.906 — HR — — 5-4-7111-1
1.962 2.625 2.250 5.062 .250 BP — — 5-4-3241
1.962 2.625 2.250 5.312 — HR 5-4-6361-1X 230909 5-4-4471-1•
1.962 2.625 2.250 5.312 .250 HR 5-4-8901-1X 230909 5-4-8851-1
5-4-8851-1 was replaced by 5-4-8901-1X; Chamfered Counterbore
1.962 2.625 2.250 6.000 .250 BP 5-4-4771X 230909 5-4-3911•
High angle yoke
1.962 2.750 2.625 5.938 — BP 5-4-5321X 98-1362 5-4-4221•
1.962 2.750 2.812 5.281 — HR — — 5-4-7041-1
1.962 2.750 2.812 5.281 — HR — — 5-4-8361-1
1.962 2.940 2.570 5.120 .310 HR — — 5-4-9511-1
1.962 3.000 2.250 4.750 — BP — — 5-4-2531
Chamfered Counterbore
1.962 3.000 2.250 5.375 — BP — — 5-4-4541
1.964-10 Spline
1.964 2.500 2.000 5.219 — BP — — 5-4-4551
1.964 2.750 2.812 5.000 — BP — — 5-4-5091
1.989-30 Involute Spline
1.989 3.000 2.688 6.000 .220 BP 5-4-7251X 231750 5-4-5721
1.989 3.000 2.688 6.000 .220 HR 5-4-8671-1X 232199 5-4-8661-1•
High angle yoke
1.998-38 Involute Spline
1.998 2.750 1.969 4.156 — BP — — 5-4-6481•
1.998 2.750 1.969 4.156 — HR — — 5-4-6481-1
1.998 2.750 2.125 4.000 — HR — — 5-4-6321-1
1.998 2.750 2.125 4.000 — HR — — 5-4-8971-1
1.998 2.750 2.125 4.125 — BP — — 5-4-6321
1.998 2.750 2.125 7.562 — HR — — 5-4-7601-1
Flanged end yoke.
1.998 3.000 2.125 4.840 .425 HR 5-4-9701-1X 232948 5-4-9691-1©
1.998 3.000 2.125 4.844 — BP 5-4-5861X 231347 5-4-6131
5-4-5861X was replaced by 5-4-7121X; 5-4-6131 was replaced by 5-4-7121X
1.998 3.000 2.125 4.844 — BP 5-4-7121X 231750 5-4-6131
5-4-6131 was replaced by 5-4-7121X
1.998 3.000 2.125 4.844 — HR 5-4-8591-1X 232200 5-4-8581-1•