Spicer Wheel Ends Service Manual, Steer & Drive Wheel Ends - Manual (Page 2)

General Information
General Information
The description and specifications contained in this service publication are current at the time of printing.
Dana reserves the right to discontinue or to modify its models and/or procedures and to change specifications at any
time without notice.
Any reference to brand names in this publication is made simply as an example of the types of tools and materials recommended
for use and should not be considered an endorsement. Equivalents, if available, may be used.
Always use genuine Spicer replacement parts.
Spicer recommends following all manufacturers recommendations for the proper handling and disposal of lubricants and solvents.
For further information contact the supplier of lubricants and solvents.
Welding or machining on any axle component is prohibited unless noted otherwise in this document or other Spicer
service literature.
Every effort has been made to ensure the accuracy of all information in this guide. However, Spicer makes no expressed
or implied warranty or representation based on the enclosed information.
Important Notice
This symbol is used throughout this
manual to call attention to procedures
where carelessness or failure to follow
specific instructions may result in
personal injury and/or component
damage.
Departure from the instructions, choice
of tools, materials and recommended
parts mentioned in this publication
may jeopardize the personal safety
of the service technician or vehicle
operator.
Failure to follow indicated procedures
creates a high risk of personal injury
to the servicing technician.
Failure to follow indicated procedures
may cause component damage or
malfunction.
Highly recommended procedures for
proper service of this unit.
NOTE: Additional service information not
covered in the service procedures.
CAUTION
IMPORTANT
WARNING
CAUTION