TROY Group MICR_IRD M600 series Security Printing Solutions Quick-Start Guide - Manual

Security Printing Solutions
Quick-Start Guide
Document #50-70436-001 Rev. C
Page 1 of 13
Product Installation Instructions
(For use with TROY MICR / IRD 4000 series and 600 series Security Printing Solutions)
Introduction
Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly
with your check-printing system. Use the TROY Security Printing Solutions CD (600 series refer to TROY
website) to install the necessary Hewlett-Packard LaserJet printer drivers and TROY support files. To ensure
successful software installation, perform the following steps in sequential order. The documentation and
installation files contained on the TROY Security Printing Solutions CD will be needed in the event that your
TROY Security Printing Solution is reinstalled in a new location or after service has been performed. In order
to best install and setup your new TROY product, use this Quick-Start Guide and the Hewlett-Packard Getting
Started Guide.
Package Contents
• TROY Security Printing Solutions CD (4000 series only) (600 series refer to TROY website)
• TROY Security Printing Solutions Information Sheet (600 series refer to TROY website)
• TROY Software License Agreement
• TROY MICR Document Template
• TROY Security Printing Solutions User’s Guide (provided in PDF format on the CD) (600 series refer to
TROY website)
• TROY MICR Basics Handbook (provided in PDF format on the CD) (600 series refer to TROY website)
• TROY Security Printing Solutions Quick-Start Guide (this document)
STEP 1:
Unpack / Setup the TROY Security Printing Solutions Printer
1. Follow ONLY the unpacking and setup procedures described in the Hewlett-Packard Getting Started Guide
(supplied in this startup package for TROY Security Printing Solutions printers only), and then proceed to
Step #2 to install the appropriate PCL 5e printer driver provided on the TROY Security Printing Solutions
CD (600 series refer to TROY website)
2. Do NOT use the Hewlett-Packard CD to install the printer software for this installation process.
3. Be sure to install the TROY MICR toner cartridge (supplied with TROY Security Printing Solutions printers
only) in the same manner as described for the standard toner cartridge. The TROY MICR toner cartridge
must be installed in your TROY printer or Hewlett-Packard printer to print MICR documents.
IMPORTANT: If you plan to connect the printer to the host computer via the printer’s USB port, do not connect
the printer USB cable until the HP PCL 5e printer driver has been installed on the host computer.
READ ME FIRST