Velleman К8095 - Manual (Page 5)

Page 5 of 9 (revision 1)
Learning a remote
1. Learning a RF remote (VM118R / K8058 / VM160DT / VM160T)
Learning a RF remote is only possible when the RF-receiver is mounted. Art. RX433N
Keep push button SW13 pressed while transmitting with the remote. The LCD display will blink twice
to confirm that the remote is learnt (if no display is mounted LED LD4 will blink twice).
2. Learning a IR remote (K8049)
•
See section “mode selection” in the manual of K8049 for setting the
remote on “MODE 4”.
• The remote is now ready to be used.
•
SHIFT
) Attention: Learning a remote erase the previous saved remote.