Velleman К8075 - Manual (Page 11)

11
19. Final connection & use
Final connection & use
CAUTION: All PARTS OF THE CIRCUIT CARRY DANGEROUS
VOLTAGES (MAINS) ! OBSERVE ALL SAFETY REQUIREMENTS
THAT MIGHT APPLY !
MOUNT THIS KIT PREFERABLY IN AN ISOLATED ENCLOSURE
Connect your application (ex. lamp) to the unit (Lout & N)
Connect the power supply to the power connections of the PCB (L
&N), see fig. 4.0.
Warning: It is important to position jumper JP1in the
correct mode prior to connecting the kit to the AC power
L
N
Application
Push button
AC POWER
Fig. 4.0