Velleman VM121 - Manual (Page 5)

5
Mode selection
MODE SELECTION
At first power up, Address 3 is automatically selected.
Press and hold SHIFT to change mode. Led starts flashing.
Press button 1..8 to select desired mode as shown below.
Hint : When the batteries are inserted, the led flashes 1..4 times indicating the selected mode.
Key Description
1 Address '1'
15 channels available ('shift' & '8' = all clear). Shift is cleared after each key press 2 Address '2'
3 Address '3'
4 Address '4'
Allows simultaneous control of K4100/K4500 and VM122 (only channels 1 to 8 using
shift key).
5 Address '5'
6 Address '6'
7 Address '7'
8 Address '8' Identical to address 4 but ‘shift’ is not cleared after each key press.
Identical to address 1 to 3 but ‘shift’ is not cleared after each key press.