Velleman PCS10 - Manual (Page 4)

USB driver installation 3
1 English
1.1 USB driver installation
Start by inserting the included PC-LAB2000 CD in your PC and executing the installation procedure
that will install the PC-LAB2000 on your hard disk. You may already be using PC-LAB2000 with
another one of our other products (PCS100,PCS500,PCG10,..). Make sure you are using Rev 1.30 or
higher.
1.1.1 fig1
Use the included USB cable to link the K8047/PCS10 to your computer's USB interface connector.
Click on the screen button "NEXT" to install the H.I.D. USB driver if necessary. Check if the green LED
(POWER) lights